Three sensors that all read temperature and humidity, with very different accuracy, interfaces, and failure modes. Here is how to choose without wasting money.
The ESP32 is faster, cheaper per feature, and has WiFi built in — yet the Arduino Uno still wins for some projects. Here is the honest comparison, with the gotchas nobody mentions.
Range, power, data rate, and cost pull in opposite directions. A practical guide to picking the right radio for IoT projects in India, including licensing rules.

Learn how to set up your ESP32 dev board, install the Arduino IDE, connect to WiFi, and build your first IoT project step by step.

A detailed comparison of the three most popular ESP32 variants to help you choose the right microcontroller for your next IoT project.

Learn how to build a kilometre-range IoT network using LoRa modules and ESP32, perfect for farm monitoring, weather stations, and remote sensing.

Five practical IoT projects using ESP32 and common sensors — from weather stations to plant watering systems — each buildable in a single weekend.

Everything you need to know about relay modules — how they work, how to wire them safely, and how to control high-voltage appliances with Arduino and ESP32.

A practical comparison of popular sensors across six categories — temperature, distance, motion, light, gas, and soil — to help you pick the perfect one.

Build a complete home automation system using ESP32 and LoRa — control garden watering, monitor your gate, and automate terrace lights from a single dashboard.

Learn how to use ESP32 deep sleep modes to build battery-powered IoT devices that last months on a single charge.

Master the I2C protocol — learn how to connect multiple sensors, displays, and modules to your Arduino or ESP32 using just two wires.

A clear comparison of the three most common communication protocols in electronics — when to use SPI, I2C, or UART in your projects.

Build a complete WiFi weather station that measures temperature, humidity, and pressure — with an OLED display and a web dashboard you can access from your phone.

Learn how MOSFETs work and how to use them to control motors, LED strips, pumps, and other high-current loads from your Arduino or ESP32.

Build a Bluetooth Low Energy remote control with ESP32 — control LEDs and read sensors from your phone using BLE and Web Bluetooth.

Design and build a completely self-sustaining solar-powered ESP32 IoT node — from panel selection to battery management and weatherproof deployment.

Build a DIY energy monitor that tracks your electricity consumption in real-time — see live watts, daily kWh, and estimated monthly bills on a web dashboard.

Learn MQTT from scratch — set up a broker, connect your ESP32, and build a real-time IoT messaging system for sensor data and device control.

Learn three methods to update ESP32 firmware over WiFi — never disconnect a deployed device to flash new code again.

Get started with LoRaWAN in India — learn how to connect ESP32 devices to The Things Network using the IN865 frequency plan for free, long-range IoT connectivity.
Build a fully functional GPS tracker using ESP32 and NEO-6M — log routes, display coordinates, and send location data over WiFi or cellular.

A practical comparison of ESP-IDF and Arduino for ESP32 development — understand the trade-offs and choose the right framework for your project.

Learn how to run multiple tasks simultaneously on ESP32 using FreeRTOS — read sensors, serve web pages, and control outputs all at once.

Master the SSD1306 OLED display — from Hello World to sensor dashboards, menus, animations, and custom graphics with Arduino and ESP32.

Build a professional WiFi setup experience for your ESP32 projects — let users configure WiFi credentials through a captive portal, no code changes needed.

Everything you need to know about WS2812B addressable LED strips — wiring, power, coding stunning animations, and building LED projects with Arduino and ESP32.

Design and 3D print professional enclosures for your ESP32, Arduino, and sensor projects — from basic boxes to weatherproof outdoor housings.

Add vibrant color displays to your ESP32 projects — learn to drive ST7789 and ILI9341 TFT screens with graphics, charts, images, and touch input.

Build blazing-fast real-time web dashboards for your ESP32 — live sensor data, instant controls, and bidirectional communication using WebSockets.

Master the voltage divider — the simplest yet most versatile circuit in electronics. Learn the math, practical applications, and common pitfalls.

Build self-healing mesh networks with ESP32 — connect dozens of sensor nodes across large areas without WiFi infrastructure using ESP-MESH and ESP-NOW.

Secure your ESP32 IoT projects from common attacks — learn HTTPS, TLS, authentication, secure boot, and credential management for connected devices.

Build reliable data logging systems with ESP32 — store sensor data on SD cards, internal flash, or stream to the cloud with timestamped CSV files.

Build a Telegram bot on ESP32 to send instant alerts, receive commands, and control your IoT devices from anywhere using your phone.

Automate your garden watering with ESP32 — soil moisture sensing, smart scheduling, weather awareness, and Telegram alerts. Save water and grow healthier plants.